Weighing terminal PMW
- Professional weighing technology
- Original BOSCHE quality
€786.00*
Available, delivery time: 1-3 days
Product information "Weighing terminal PMW"
The process weighing terminal Bosche PMW does simple and complex filling and mixing applications.
It provides standard and customized filling sequences that can be configured as needed.
It is suitable for silo weighing, hopper weighing, metering and mixer weighings.
Filling and mixing applications for up to 14 components can be quickly configured with the the PMW - without complex and costly programming.
You can choose between five operating modes: BASE, LOAD, UNLOAD, 03 PRODUCTS and 06 PRODUCTS.
This weighing transmitter enables, with the industry standards of bus technology, the monitoring of various manufacturing processes and is a cost-effective alternative to comparable electronics from PLC manufacturers.
Features
- EC type-approval legal for trade according to OIML R76:2006 Class III and IV
- Maximumum number of verification scale intervals: n = 10000 or 3x10.000e @ 0,2 µV/d
- Optional: Analog output, optically isolated, 16-bit
(selectable 0-20mA, 4-20mA, 0-10V, 0 - 5V, ± 10V, ± 5V) - Wide input voltage range: 12 - 24V DC + / - 10%, + / - 10%
- Number of parallel load cells: max.8 (at 350 ohms)
- High measuring rate of the transmitter up to 300 measurements / sec
- Fast A / D converter: 24 bit, (16.000.000 Teile) 4.800 Hz
- Six-digit 7-segment LED display (height 14 mm) with 8 status LEDs
- Maximum number of decimals: 4
- Programmable switching contacts
- 3 programmable potential free outputs: max. 115V AC / 60mA for driving relays
- Two digital, optically isolated inputs
- Standard interface: RS 485 + RS 232
- All connections via screw terminals
- Optional: Profibus DP, DeviceNet, CANopen, Profinet IO, Modbus/TCP, Ethernet/IP. Ethernet TCP/IP
Area of application
The PMW is a high precision process weighing indicator & Controller. Weight values are reproduced quickly and accurately.
The weighing terminal has analog and digital outputs, which provide stable measurement information.
Programmable relay outputs and two digital logic inputs are also available as standard.
The analog output provides proportional to the weight an analog signal that can be processed by a PLC or PC.
Savings through modern control
Valves and filling devices can be controlled directly from PMW - without costly PLC.
Fast filling: 300 updates / sec
Filling and mixing processes are based on speed.The high A / D conversion of 300 values per second enables the accurate and rapid detecting weight data. The fast update keeps up with the process speed. The indicator is ideal for mixing and stirring processes.
Construction - Operation
The PMW weighing terminal has a 6-digit weight and service display.
The weight value can be controlled locally by the well-read, bright LED display.
The five control buttons enable easy operation.
The weighing terminal is designed for panel mounting.
Both 4 - and 6-wire load cells are can be connected.
The peak value function (PEAK) can be linked with a switch point output a serial interface, analog output, or display.
Weighing technology - Legal for trade
The weighing terminal PMW is legal for trade according to OIML verification class III and IIII. The weighing function is authorized for up to 10,000 components.
The calibration and function setting is made easy via the keypad.
A theoretical calibration - without weights - only by entering the weighing range and the nominal characteristic value of the load cell (mV / V) is also possible.
Interfaces - Communication
The communication is via an RS485 interface,and up to 32 can be connected in the bus. The second serial interface RS 232 is also fitted as standard.
A variety of available interfaces,enables simple and safe integration of weighing systems with any automation system.
Calibration
- Calibration with reference weight
- Teoretical calibration via direct mV/V input (calibration without test weight - also possible with partially filled containers, without previous emptying)
| Type | Version |
|---|---|
| PMW-B |
Basic weighing programme |
| PMW-C |
Programme for weighing with dosing function for filling |
| PMW-S | Programme for weighing with dosing function for emptying - negative weighing |
| PMW-3 |
Weighing programme with recipe function for 3 products |
| PMW-6 |
Weighing programme with recipe function for 6 products |
| PMW- 14 |
Weighing programme with recipe function for 6 products |
| Optional | |
| RE5M |
External 5-relay module for PMW-C, PMW-S or PMW-3 |
| Alibi | Alibi memory |
| IP 65 |
IP65 Front seal |
| Interface | Fieldbus | |
| Analogue |
Opto-isolated 16 bit analogue output |
| RS485 |
Additional RS485 interface |
| Profibus DP |
Profibus DP protocol |
| Ethernet/IP | Ethernet/IP protocol protocol - Ethernet interface |
| Ethernet TCP/IP |
Ethernet TCP/IP protocol - Ethernet interface. |
| Profinet IO | Profinet IO protocol - Ethernet interface. |
| Modbus/TCP |
Modbus/TCP protocol - Ethernet interface. |
| CANopen | CANopen-protocoll |
| DeviceNet | DeviceNet-protocoll |
| USB |
USB interface for data storage on USB stick (included). |
| A/D converter | 24 bit (16,000,000 parts), 4,800 Hz |
| Load cell supply | 5 V DC / 120 mA |
| Power | 5 W |
| Supply voltage of the inputs | 5- 24 VDC, |
| Max. Counter steps | ± 999999 (with measuring range +/-10mV = rec. 2mV/V) |
| Linearity | < 0.01% of range |
| Temperature drift (of the analogue output) | 0,0005 (0,003) % of range / °C |
| Number of load cells ( connected in parallel) | Max. 8 á 350 Ω or 16 á 700 Ω (4-wire technology) |
| Measuring range | ± 39 mV |
| Max. Sensitivity of the load cells | ± 7 mV |
| Max. Conversions per second | 300 conversions/s.. |
| Display | 6 digits, 7 segments, LED red + 6 status LEDs |
| Decimal places | 0-4; 0.01, 0.001, 0.0001 |
| Resolution display - adjustable increments | x 1 x 2 x 5 x 10 x 20 x 50 x 100 |
| Status symbols | Zero, tare, storage status |
| Measuring range | -1mv ~ +14 mv |
| Keyboard | Key pad with 5 keys to control the scale functions |
| Digital filter | 0,012...7 sec |
| Conversion rate | 5 - 300 Hz |
| 2 x digital optically isolated inputs | 5 - 24VDC PNP |
| 1 x analogue output; optically isolated, 16 bit | 0 / 4 ... +20 mA at max. 300 Ω-10 / -5 ... 0... +5 / +10 V DC at min. 10 kΩ |
| 3 x logical relay outputs | max. 115 VAC / 150mAC |
| 1 x serial interface 485 | 10 ... 300 Hz (TXRS485 / TDRS485) |
| Baud rate | 2.400, 4.800, 9.600, 19.200, 38.400, 115.200 |
| Operating temperature | - 20 ... + 60 °C |
| Storage temperature | - 30 ... + 80 °C |
| Humidity | max. 85% r.H., non-condensing |
| Dimension (W x D x H) | 96 x 96 x 135 mm |
EU Type Examination CertificateSimilar Products
