Rectangular load cell K90S
- Free shipping within Germany
- Professional weighing technology
- Original BOSCHE quality
€336.00
Available, delivery time: 1-3 days
Description
Product information "Rectangular load cell K90S"
K90S Shear Beam Load Cell for Mobile Vehicle Scales with Eccentric Load
The K90S is a robust shear beam load cell made of alloy steel or stainless steel for mobile scales and vehicle weighing systems with eccentric loading. It has been specifically developed for applications where off-center loads must be measured reliably and precisely – for example in refuse collection vehicles or container scales. This load cell is also suitable for weighing wall-mounted containers. Thanks to its special design, it is ideally suited for use under demanding and dynamic operating conditions.
The mechanical double-link system design (parallelogram) compensates torsional forces under one-sided loading. This effectively minimizes measurement errors caused by eccentric loads – for example when weight is applied to one corner of a platform. Even during long-term operation, the K90S load cell delivers precise and reproducible measurement results. The laser-welded measuring element complies with protection class IP65.
Basic Knowledge – Load Cells
Help with Selecting a Load Cell
Applications
The K90S shear beam load cell is used in weighing systems for waste containers, rear-loading refuse collection vehicles, and on-board vehicle weighing systems. Further typical applications include container scales, mobile weighing systems for front loader vehicles, as well as overload protection systems for lifting platforms and goods lifts.
Features
- Material: alloy steel or stainless steel
- Rated capacities: 550 kg, 880 kg and 2,000 kg
- Laser-welded measuring element
- Protection class IP65
- Robust design with high accuracy
- High dynamic load capacity
- Corner load compensated for eccentric loading
- Easy installation – force introduction via half-thread mounting
- Compatible with systems from other manufacturers
Installation
Technical Drawing
All dimensions in mm | Subject to technical modifications
| Load | A | B |
|---|---|---|
| 550 kg, 880 kg | M12 | Ø13 |
| 2,000 kg | M16 | Ø18 |
Properties
| Breaking load (Ed): | 250 % of emax |
|---|---|
| Cable length: | 3 m |
| Input resistance (RLC) at reference temperature: | 400 ± 2 Ω |
| Insulation resistance: | >5.000 MΩ |
| Limit load (EL): | 150 % of Emax |
| Material: | Alloyed steel |
| Maximum permitted supply voltage (BU): | 15 V |
| Minimum preload (Emin): | 0 |
| Nominal load (Emax): | 2.000 kg, 550 kg, 880 kg |
| Nominal temperature range (BT): | - 10 ... + 40 °C |
| Nominal value (Cn): | 2,0 mV/V |
| Number of division values (nLC): | 3000 |
| Output resistance (RO) at reference temperature: | 352 ± 3 Ω |
| Protection class according to (DIN 40.050 / EN 60529): | IP 66 |
| Recommended supply voltage (Uref): | 5 - 12 V |
| Zero adjustment: | ≤ ± 1 % v. Cn |
| Accuracy class: | G3 |
| Material: | Alloyed Steel |