Filter
Product information "Single point load cell H60N"

The platform load cells H60N are beam load cells with lateral parallel guiding and a centered bending eye made of stainless steel. Through the laser welded construction it is ideally suited for use in the chemical industry, food industry and similar industries. 
The load cell H60N is approved to OIML R60 up to 3000d and gives extremely accurate reproducible results, over a long term even in harsh industrial environments. 
Each individual load cell H60N is corner adjusted and optimised for out of center load sensitivity. This ensures that there will be no measurement error when the load is placed off centre, eg in a corner of a platform. 
The load cell is laser-welded and meets the requirements of protection class IP66. 

akademische-kappe3 Basic knowledge Load cells

icon_small_pdf Help with selecting a load cell

Typical Application

Scales for food industry, Multi-haed weighers, belt weighing, check weighing and bag filling, overhead rail weighing, dispensing and pallet scales as well as industrial applications, such as the overload protection of lifting devices used in the handling and conveying of paper and steel products.

Features

  • Construction: Stainless steel, laser-welded
  • Capacity: 250 kg - 1.250 kg
  • Accuracy class C3, Y=15.000
  • Approved to OIML R60 up to 3000d
  • Design: The measuring element is hermetically sealed and has a calibrated output current
  • Protection class: IP 66
  • Off center load compensated 
  • Load Cell is suitable for platform sizes up to 600 x 800 mm
  • Robust flat design for harsh industrial environment
  • Compatible with other sources

Mounting

The large screw-on surfaces and four threaded holes at the front and rear provide ideal conditions for the problem-free construction of a scale with large platform dimensions. Two steel or aluminum plates of up to 600 x 600 mm are screwed onto the two screw-on surfaces at the top at the front or at the back and bottom of the cable outlet. A parallel connection of several platform load cells is only possible with a balanced output (nominal value and output resistance).

Drawing

single_point_h60n_zeichnung4-leiter-technik

All dimensions in mm | Subject to technical changes

Versions

Typ Nennlast, Emax Genauigkeitsklasse
H60N-C3-0250 250 kg C3
H60N-C3-0300 300 kg C3
H60N-C3-0500 500 kg C3
H60N-C3-0750 750 kg C3
H60N-C3-0800 800 kg C3
H60N-C3-1000 1.000 kg C3
H60N-C3-1250 1.250 kg C3
Breaking load (Ed): 200 % of emax
Cable length: 6 m
Input resistance (RLC) at reference temperature: 400 ± 20 Ω
Insulation resistance: >5.000 MΩ
Kennwert vom relativen Mindestteilungswert d. WZ (Y = Emax / vmin): 15.000 Teile von Emax
Limit load (EL): 150 % of Emax
Material: Stainless steel
Maximum permitted supply voltage (BU): 15 V
Minimum preload (Emin): 0
Nominal load (Emax): 1.000 kg, 1.250 kg, 250 kg, 500 kg, 750 kg
Nominal temperature range (BT): - 10 ... + 40 °C
Nominal value (Cn): 2,0 mV/V
Number of division values (nLC): 3000
Output resistance (RO) at reference temperature: 352 ± 3 Ω
Product-group: Load cell
Protection class according to (DIN 40.050 / EN 60529): IP 66
Recommended supply voltage (Uref): 5 - 12 V
Zero adjustment: ± 3 % v. Cn
Accuracy class: C3 (nach OIML R 60)

Similar Products

Digital Single point load cell H33A-D
Capacity: 15 - 300 kg
Material: Aluminium
€82.00*
Digital Single point load cell H20A-D
Capacity: 15 - 300 kg
Material: Aluminium
€95.00*
M
Platform - Load Cell H62N
Capacity 20 - 200 kg
Stainless steel, laser welded
€1,000.00*