Product information "Spring balance Macro from 5kg to 50kg"

Spring scale for mechanical weight measurement with quality spring for a long service life. The measuring device uses the extension of a coil spring to measure weight. The spring scale determines the mass using the weight of the measuring object and displays this on a scale in grams.
The precision spring scales have a robust housing made of aluminum tube with a colored anodized, abrasion-free, precision scale with high resolution. Integrated recoil damping is particularly important for tensile samples up to a maximum of 30 kg. Play-free spring bearings with integrated tare screw guarantee high-precision adjustment.
They are ideal for determining weight in the laboratory, at school and for other weighing applications.
The spring scales are characterized by very high precision: maximum deviation ± 0.3% of the attached load. They have a tare range of 20% of the maximum weighing range and are available in grams (g). The spring scales have a clamp as a load-bearing device. The spring scales are ideal for demonstration purposes.
Always ready for mobile use as no batteries are required.
The spring scale can be quickly converted from the measuring function for tensile force to a device for measuring compressive force. All you need is the compression force conversion kit.

Features of the spring scale

  • Cylindrical spring scale
  • Load-carrying device: hook
  • Easy to use
  • Mechanical, robust, durable with fatigue-free stainless steel spring
  • Accuracy +0.3% of the load
  • Taring range 20%
  • Quality in material and shape
  • Perfect adjustability
  • Packaging: transparent case
  • Components: corrosion-free
  • Light, precise, robust "made in Switzerland"

Spring scale versions

Type Weighing range, 
Recording Color
Medio 300M 300 g 2 g federwaage_klammer_5919525a8ab3d Gray
Medio 600M 600 g 5 g Purple
Medio 1000M 1,000 g 10 g Blue
Medio 2500M 2,500 g 20 g federwaage_haken Red
Medio 3000M 3,000 g 20 g Federwaage_Haken Green
Pressure set Using this conversion kit, you can also use the spring scales to measure pressure. measure
Drag indicator  

Scope of delivery

  • 1 x spring scale with clip in a transparent designer case


pes_medioline_a4-2591af1569321a 1  The rotating bracket enables optimal readability of the scale.
2  Zero point and tare setting screw with precise ratchet prevents accidental adjustment.
     Tare range of 20% of capacity possible.
3  Integrated kickback damping
4  Seal-free spring bearing with high-precision adjustment with fatigue-free stainless steel spring.
5 pointer cams with precise lines on the scale ensure error-free readings
Secured overload up to 5,000 g.
6 ... Abrasion-free, color-anodized precision scale with high resolution on aluminum tube.
7  Drag indicator optionally available 
8  Boor suspension can be easily replaced with other accessories thanks to the clip eyelet.
9  Optional: Pressure set with pressure rod and screw-on tip and radial handle

Dimensions of the spring scale


Type Weighing range Own weight
S Lo Lm Lp d (Ø) Color
Medio 300M 300 g 32 g / 47 g 100 mm  220 mm 320 mm 300 mm 12 mm Gray
Medio 600M 600 g 33 g / 48 g 100 mm 220 mm 320 mm 300 mm 12 mm Red
Medio 1000M 1000 g 36 g / 50 g 100 mm 220 mm 320 mm 300 mm 12 mm Purple
Medio 2500M 2500 g 38 g / 52 g 100 mm 220 mm 325 mm 300 mm 12 mm Green

Conversion to a compression force gauge in 20 seconds

Using the easily adaptable conversion set, you can also measure compression force with the spring scales.

  Pull off the bracket with the ring to the side. Equip the pressure rod with the tip as desired (M2 thread). Insert the pressure rod into the scale and screw it in well.
Insert the hook screw into the cover, put the plastic handle over it and tighten it with the M4 nut. The hook screw without the plastic tube is used for fastening in machines, etc. If only pressure is used, pull the lower suspension off to the side. Measurement: The pressure rod must always be at a right angle to the measuring surface.
Product-group: Spring scale

Accessory Items

Adjustment set for spring balances

For all Macro spring scales instead of the standard hook.

Lastklammer für Federwaagen

For all Macro spring scales up to 35 kg. The range of the clamping thickness can be adjusted. It features high clamping force and can be rotated.


Similar Products

Macro spring force gauge from 50N to 500N
Special spring scale with Newton force measuring scale
Aluminum housing with drag indicator