Product information "Tension and compression load cell F10N"

The compact force transducer F10N was designed specifically for the measurement of static and dynamic tension and compression loads. The central thread in the upper and the bore in the lower part of the load cell ensures optimum transmission of force into tension or compression direction. The load cells are manufactured from high quality stainless steel and also provide in long-term use in harsh industrial environments accurate and reproducible results. The load cell is laser welded and meets the requirements of protection class IP66. For the measurement of forces these load cells are also very often calibrated in the physical unit Newton and used as a force transducer..

akademische-kappe3 Basic knowledge Load cells

icon_small_pdf Help with selecting a load cell

Typical application

Hopper scales, belt and doses scales, hybrid scales, monitoring joining forces, Tensile force measurements


  • Material: Stainless steel
  • Capacity: 500 - 1.000 kg
  • Design: the measuring element is laser-welded
  • Protection class: IP 66
  • Particularly robust for heavy duty industrial use
  • Force application: external thread / supporting surface with threaded holes
  • Calibration in N or kg possible
  • Compatible with other sources


The load cell should be installed in the way that the force is axially and centrally introduced into the transducer. Force shunts, side forces and torques can cause measurement errors, and should be eliminated by installation aids, such as knuckle eyes.



Load D D1 B H H1 H2 H3 H4 M
0,5 - 1 t 50 21 35 72 24 6 5 20 M12

 All specifications in mm | Subject to technical changes

Breaking load (Ed): 200 % of emax
Cable length: 5 m
Input resistance (RLC) at reference temperature: 400 ± 10 Ω
Insulation resistance: >5.000 MΩ
Limit load (EL): 150 % of Emax
Material: Stainless steel
Maximum permitted supply voltage (BU): 15 V
Minimum preload (Emin): 0
Nominal load (Emax): 1.000 kg, 500 kg
Nominal temperature range (BT): - 10 ... + 40 °C
Nominal value (Cn): 2,0 mV/V
Number of division values (nLC): 3000
Output resistance (RO) at reference temperature: 352 ± 3 Ω
Product-group: Load cell
Protection class according to (DIN 40.050 / EN 60529): IP 66
Recommended supply voltage (Uref): 5 - 12 V
Zero adjustment: ≤ ± 1 % v. Cn
Accuracy class: 0,03

Similar Products

Canister type load cell C27N
Capacity: 10 - 50 t
Alloy steel, laser-welded
Digital Single point load cell H33A-D
Capacity: 15 - 300 kg
Material: Aluminium