Weighbeam D55S
- Professional weighing technology
- Original BOSCHE quality
€1,740.00
Available in 14 days, delivery time on request
Description
Product information "Weighbeam D55S"
The low profile double shear beam load cell D55S is ideally suited for applications in harsh industrial environments. The main sector the weighbeam is uses is the steel industry.
Due to the high repeatability and high long-term stability, the load cell supplies very good results, even after perennial use.
The weighbeam is largely insensitive to side forces and don´t need further mounting parts. The load cell is particularly easy to maintain, because the connection cable is interchangeable connected via a plug connection.
The double-shear force transducers can be connected in 6-wire technology, so that even with large feed lengths or occurring temperature differences by readjusting the supply voltage accurate measurement results can be achieved.Of course, a 4-wire connection is possible. For this purpose only the supply voltage is simply short-circuited with the corresponding sense line.
Basic knowledge Load cells
Help with selecting a load cell
Typical Application of the Weighbeam
Metal Industry, Ladle turret scales, Ladle feries, Scrap bucket scales, Tundish cars weighing scales, Roller table scale, Hopper and Silo weighing also in high temperature enviroments.
Features
- Material: alloy steel, nickel-plated
- Capacity: 50.000 - 200.000 kg
- Construction: The measuring element is sealed and protected
- Protection class: IP 65
- Compact and very flat construction
- Easy assembly
- Cable connection by plug connection IP 67
- Robust design for heavy-duty use in the industrial sector
- Optional extended operating temperature range up to 150°C
- Compatible with other manufacturers
Mounting
Due to the special construction the weighbeam is largely insensitive to side forces and don´t need further mounting parts.
Loads should act as closely as possible in the measuring direction. Torsional moments, off-center loading and transverse or side forces cause measuring errors and can damage the load cells permanent.
Drawing
| Load | L | L1 | L2 | L3 | L4 | L5 | L6 | H | H1 | H2 | H3 | B | B1 | B2 | B3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50 t | 450 | 340 | 26 | M20*30 | 80 | 398 | 40 | 130 | 105 | 25,5 | 32 | 120 | 68 | 110 | 75 |
| 100 t | 500 | 370 | 30 | M24*36 | 90 | 444 | 44 | 143 | 118 | 28,5 | 38 | 140 | 80 | 130 | 90 |
| 150 t | 560 | 410 | 33 | M24*36 | 90 | 500 | 44 | 158 | 133 | 32 | 38 | 160 | 94 | 150 | 102 |
| 200 t | 620 | 450 | 33 | M24*40 | 90 | 560 | 44 | 175 | 150 | 32 | 40 | 180 | 114 | 160 | 110 |
| 500 t | 820 | 560 | 50 | M42*70 | 150 | 720 | 80 | 260 | 230 | 60 | 40 | 250 | 156 | 250 | 160 |
Pin assignment
Pin A: EXC + / red
Pin B: Sense + / blue
Pin C: EXC - / black
Pin D: Sense - / yellow
Pin E: Signal + / green
Pin F: Signal - / white
Pin G: not documented
Properties
| Cable length: | On request |
|---|---|
| Input resistance (RLC) at reference temperature: | 756 ± 6 Ω |
| Insulation resistance: | >5.000 MΩ |
| Limit load (EL): | 120 % of Emax |
| Material: | Alloyed steel |
| Maximum permitted supply voltage (BU): | 15 V |
| Minimum preload (Emin): | 0 |
| Nominal load (Emax): | 50.000 kg, 100.000 kg, 150.000 kg, 200.000 kg, 500.000 kg |
| Nominal value (Cn): | 1,08 (50t); 1,38 (100t); 1,57 (150t); 1,63 (200t) mV/V |
| Number of division values (nLC): | 3000 |
| Output resistance (RO) at reference temperature: | 700 ± 4 Ω |
| Protection class according to (DIN 40.050 / EN 60529): | IP 65 |
| Recommended supply voltage (Uref): | 5 - 12 V |
| Zero adjustment: | ≤ ± 1 % v. Cn |
| Accuracy class: | G3 |
| Material: | Alloyed Steel |
