Double Shear Beam load cell D41S
- Professional weighing technology
- Original BOSCHE quality
€554.00
Available, delivery time: on request
Product information "Double Shear Beam load cell D41S"
D41S double-ended shear beam load cell for on-board weighing systems
The D41S is a low-profile double-ended shear beam load cell with parallel load introduction, made from high-quality alloy tool steel. This robust heavy-duty load cell is ideal for on-board weighing applications, for example for container weighing on vehicles, in waste collection vehicles, as well as in trailers and semi-trailers.
The D41S vertical force sensor delivers precise and reproducible measurement results, even in long-term use in harsh industrial, vehicle and agricultural applications. The strain gauges are protected by a laser-welded measuring element and are therefore reliably shielded against demanding operating conditions.
Help with selecting a load cell
Applications
The D41S is typically used in on-board weighing systems to reliably record vehicle loads and prevent overloading. Suitable applications include dump trucks, feed wagons, grain trailers, trailers, slurry spreaders, waste collection vehicles and other commercial vehicles.
In addition, the double-ended shear beam load cell can be used to support bearing blocks or in test benches. Depending on the application, it is installed, for example, in the underbody area between the body and chassis or at suitable suspension points.
Features
- Material: high-quality alloy steel, nickel-plated
- Rated load: 20,000 kg
- Laser-welded measuring element to protect the strain gauges
- Protection class: IP65
- Simple and robust installation
- Suitable for demanding continuous use in industrial environments
- Compatible with selected load cells from other manufacturers
Technical drawing


All dimensions in mm | Subject to technical changes
| Breaking load (Ed): | 200 % of emax |
|---|---|
| Cable length: | 9 m |
| Input resistance (RLC) at reference temperature: | 400 ± 50 Ω |
| Insulation resistance: | >5.000 MΩ |
| Limit load (EL): | 120 % of Emax |
| Material: | Alloyed steel |
| Maximum permitted supply voltage (BU): | 15 V |
| Minimum preload (Emin): | 0 |
| Nominal load (Emax): | 10.000 kg, 15.000 kg, 20.000 kg, 30.000 kg |
| Nominal temperature range (BT): | - 10 ... + 40 °C |
| Nominal value (Cn): | 2,2 ± 0,01 mV/V |
| Number of division values (nLC): | 3000 |
| Output resistance (RO) at reference temperature: | 350 ± 3 Ω |
| Protection class according to (DIN 40.050 / EN 60529): | IP 65 |
| Recommended supply voltage (Uref): | 5 - 15 V |
| Zero adjustment: | ≤ ± 1 % v. Cn |
| Accuracy class: | G3 |
| Material: | Alloyed Steel |